How to Measure and Install Cellular Shades

INSTRUCTIONS FOR INSIDE MOUNT

Inside-mounted cellular shades fit inside the window casing.

Measuring the width: The width measurement is taken from the inside edge of the window frame at the top. Always measure to the nearest ⅛’’, and be sure to use a steel measuring tape. Your order width=Your window width-¼’’.
Measuring the depth: Your window needs to be deep enough for an inside mount. For dry-battery model, the minimum depth is 1 ⅞’’. For rechargeable model, the minimum depth is 2 ⅞’’.
Measuring the height: The height measurement is taken from the window frame in three places, top left, center, and top right down to the sill. Record the tallest height up to the nearest ⅛’’. This will be the height you order.

INSTRUCTIONS FOR OUTSIDE MOUNT

Outside-mounted cellular shades hang above the window, or on the wall surrounding the window.

Measuring the width: Take the measurement at the top of the window frame. You’ll use that measurement and add the recommended 4 to 6 inches. This will ensure the window is properly covered. For more light coverage and privacy, add even more to the measurement.
Measuring the height: Take it from three locations, the left, center, and the right. You’ll use the tallest height and add the recommended 4 to 6 inches. This will ensure the window is properly covered.

Please note that we only make your product to the dimensions you specify, with no additions made.

HOW TO INSTALL CELLULAR SHADES

Step 1. Bracket location and installation

Step 2. Mounting the shade

Step 3. Directly operate with the pre-programmed remote, or connect Tuya app for automation and voice commands if you’ve purchased the smart control options.

You can also find a shade installer near your location for professional services.